MILTON ROY, LMI Range - CPi Technology

Products

MILTON ROY, LMI Range The LMI range's electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes. LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years. Benefits · Reliable and rugged · Fully compatible with most chemicals · Liquid ends for high viscosity (HV) · Accurate even at very low flow rates from 0 to 10 l/h · Flow rate adjustable from 1 to 1,000 ensures that process requirements are accurately met · Highly adaptable · Versatile programmable models · External control pulse multiplication and division for series B9 and C9 · Microprocessor control of functions for series B9 and C9 · Reduced maintenance: electromagnetic control requires no lubrication or cleaning · Proportional dosing · Protected electronics · Small footprint Non-Ireland Based enquiries: To find an authorised Milton Roy representative allocated to your country please utilise the following link to assist you. https://locator.miltonroy.com/distributors/miltonroy

MILTON ROY, LMI RANGE Technical Characteristics LMI pumps are available in 6 series with 5 different control modes, enabling you to find the model that meets your exact requirements. 5 control modes Mode 0: Economical dosing · Flow rate variation from 20 to 100% · Stroke frequency fixed, stroke length manually adjustable · This is the simplest electromagnetic pump in the LMI range Mode 1: Adjustable dosing · Flow rate variation from 1 to 100% · Stroke frequency and stroke length manually adjustable · This operating mode allows for a larger flow range Mode 5: Proportional dosing There are two usage options for this version: · Stroke frequency and stroke length manually adjustable · Adjustment controlled by a dry contact originating from a water meter or pulse generator Pump stroke frequency varies automatically in relation to the emitter signal Optional low level safety device to prevent loss of priming Mode 7: Automated dosing 2 options: · Stroke frequency and stroke length manually adjustable · Pump stroke frequency varies automatically with the main flow rate. Control via dry contact or open collector originating from a water meter or pulse generator Optional adapters MICROPACE® – multiply, divide, convertor 4-20mA, can be used to adapt the pump to different control modes Optional low level safety device to prevent loss of priming Electronically adjustable power control (Series B and C) Mode 9: Microprocessor programmed dosing · Manually adjustable stroke length and frequency from 1 to 6,000 strokes per hour · Remote start/stop, proportional pulse control, integrated multiplier and divider, configurable 4-20 mA signal control, pulse copying, alarm display · Optional low level alarm and self-monitoring flow system · Electronically adjustable power control 6 series P series: Most economical · Débit maximum : 12 l/h · Maximum flow rate: 12 l/h · Maximum pressure: 17.3 bar · Available in modes 0, 1 and 5 AA series: Most comprehensive · Maximum flow rate: 7.6 l/h · Maximum pressure: 17.3 bar · Available in mode 7 and 9 B series: Most standard · Maximum flow rate: 26 l/h · Maximum pressure: 10.3 bar · Available in mode 1, 7 and 9 C series: Largest flow/pressure range · Maximum flow rate: 76 l/h · Maximum pressure: 20.7 bar · Available in mode 1, 7 and 9 E series: ADF version · Maximum flow rate : 76 l/h · Maximum pressure: 20.7 bar · Available in mode 7 J series: Most environmentally-friendly · Maximum flow rate: 7.5 l/h · Maximum pressure: 9.7 bar · With a 12 V power supply, it can operate on batteries or via solar panel · Available in mode 5 4 materials of liquid ends are available PVC This is the most economical material and is suitable for a wide range notably in the field of water treatment and agriculture Acrylic This material has good compatibility with chlorine and fluorinated products. Thanks to its transparent nature, air bubbles and deposits can be seen and eliminated. PVDF Suitable for use with concentrated acids and bases and oxidants These standard liquid ends are supplemented by a range of special liquid ends allowing for the dosing of viscous products (polymers, silicon… up to 10,000 cP), stainless steel liquid ends for pressurised processes, PP liquid ends