MILTON ROY, Electronmagnetic Dosing Pumps LMI

Products

MILTON ROY, Electromagnetic Dosing Pumps Excel AD By introducing the new EXCEL™ AD8 and AD9 electromagnetic pumps, Milton Roy Europe offers its expertise to the users by providing reliable and easy to use electromagnetic pumps. Thanks to its numerous programming functions, the AD9 series could suit any process. Benefits

Easy to use: the (calculated) dosing rate is displayed in l/h or GPH
Fully compatible with most chemicals used
Can be adapted to suit the process: control can be manual, by pulse, by 4-20 mA signal, sequential via timer, batch injection, pulse division/multiplication, 24 VDC output, remote on/off
Wide injection range
Display of the pump status
High pumping capacity due to double-ball check valves
Dosing of products requiring automatic degassing (concentrated bleach, etc.) with AutoPrime™ liquid ends
Dosing of high viscosity products
Monitoring of product transfer operation: single or dual level switch available as option

Available liquid ends: PVC, stainless steel, design for viscous products (stainless steel – up to 1,350 cP)
Maximum flow rate: 2.14 l/h
Maximum pressure: 50 bar max. with stainless steel liquid end / 25 bar max. with PVC liquid end
Accuracy: ± 2% over a range of 10 to 100% of the nominal flow rate
Linear stroke frequency adjustment: while running or stopped. C1 series: from 1 to 100 spm, C7 series: from 5 to 100 spm, C9 series: from 1 sph to 100 spm
Linear stroke length adjustment: from 10% to 100% recommended
Thrust: 400 N
Temperatures of pumped fluids: stainless steel liquid ends: -5 °C to +50 °C as standard / PVC liquid end: +10 °C to +50 °C
Maxium ambient temperature: +50 °C
Protection: IP65
Maximum viscosity: standard liquid ends: 45 cP / XV liquid end for viscous products: 1,350 cP
Suction lift: 6 mWC primed
Minimum discharge pressure: 2 bar
Valves: double valve and double ball as standard

3 different control modes are available, enabling you to find the model that meets your exact requirements. Mode 1: adjustable dosing

Flow rate variation from 1 to 100%
Stroke frequency and stroke length manually adjustable
This operating mode allows for a larger flow rate with a reduced cost

Mode 7: automated dosing

Stroke frequency and stroke length manually adjustable
Pump stroke frequency varies automatically with the main flow rate. Control via dry contact or open collector originating from a water meter or pulse generator. Optional adapters MICROPACE – multiply, divide, convertor 4-20 mA – can be used to adapt the pump to different control modes
Optional low level safety device to prevent loss of priming
Electronically adjustable power control

Mode 9: microprocessor programmed dosing

Manually adjustable stroke length and frequency from 1 to 6,000 stroke per hour
Remote start/stop, proportional pulse control, integrated multiplier and divider, configurable 4-20 mA signal control, pulse copying, alarm display
Optional low level alarm and self-monitoring flow system
Electronically adjustable power control